| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | ASTM D297 | 1.25 | DIN 53508 | 1.25 |
| HARDNESS | ASTM D2240 | 65 ± 5 SH A | DIN 53505 | 65 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | ASTM D412 | 995 PSI | DIN 53504 | 60 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | ASTM D412 | 250% | DIN 53504 | 250% |
| COMPRESSION SET (70ºC/24 HRS/25% SET) (MAX) | ASTM D395 METHOD B | 35% | DIN 53517 | 35% |
| ABRASION LOSS (MAX) | ASTM D 5963 | 300 MM3 | DIN 53516 | 300 MM3 |
| TEAR RESISTANCE ( ANGULAR ) MIN | ASTM D624 | 123 LBS/INCH | DIN 53515 | 22 KG/CM |
| CHANGE IN PROPERTIES | ||||
| HEAT AGEING ( 72 HRS. AT 70ºC ) | ASTM D 573 | |||
| — HARDNESS (PTS) | + 6 (MAX) | + 6 (MAX) | ||
| — TENSILE STRENGTH (%) | + 10 / -10 | + 10 / -10 | ||
| — ELONGATION AT BREAK (%) | + 10 / -20 | + 10 / -20 | ||
| VOLUME SWELL : AT 70ºC FOR 72 HRS/IN | ASTM D 471 | |||
| ASTM OIL NO.1 | -2% | -2% | ||
| ASTM OIL NO.2 | + 4% | + 4% | ||
| ASTM OIL NO.3 | + 13% | + 13% | ||
| AT FUEL B /24 HRS/ROOM TEMP, MAX | + 25 % | + 25 % | ||
| POLYMER CONTENT (NITRILE/PVC BLEND) | BLEND | BLEND | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | ASTM D 1149 | GOOD | GOOD | |
| — DILUTE ACIDS AND BASES | GOOD | GOOD | ||
| — CONCENTRATED ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | EXCELLENT | EXCELLENT |
X
- No products in the list
- Home
- About Us
- ProductsOther Products
- Boot Seal Profiles
- Cable Protection Profiles
- Clamp Profiles
- Container Door Seal Profiles
- Co-Extruded Side Seal Profiles
- Curtain Wall Profiles
- D Fender Profiles
- Dilatation Seal Profiles
- Door Seal Profiles
- EPDM Sponge Profiles
- Filler Profiles
- Flock-Coated
- Glass Run Channel Profiles
- Glazing Profiles
- Fixed Rubber & Pressure Plate Profiles
- Bespoke Manufacturing
- Research & Testing
- Sectors
- Quote Request
- Contact Us
