Home / Sheeting / Natural Rubber / Black High Abrasion Takibak Grade 60° Shore
Common Era, Reach Compliance, RoHS Compliant and Technischer Überwachungsverein logos

Item Code: SM152BL

Black High Abrasion Takibak Grade 60° Shore

SM152 Black High Abrasion Natural Rubber Takibak Grade 60° Shore is a high abrasion resistant rubber sheet material particularly suitable for applications such as snow plough rubbers, scraper blades, wipers and hard chute lining. It is a Natural Rubber Rubber with a hardness of 60° shore.
Thickness’ of 20mm & 25mm are available with heavy-duty fabric backing SM152DB.

TAKIBAK’ speciality coated materials
Takibak is a very specialised coating material applied to rubbers to aid with bonding to other substrates. It is coated to a surface of
rubber material and then covered [for protection] with a peel off film. It is normally applied to high abrasion and wear materials for the
lining of chutes and bins but can be applied to other materials for differing applications if required and where the bond or lamination of
a material is important.

The above sheeting is manufactured from top quality virgin materials and ingredients meeting high standard of performance

  • Material Profile: See below
  • Thickness: 3.0mm to 25mm
  • Sheet Size: 1.4m wide in 10 and 5m rolls
  • Finish: Plate finish
  • Cutting: Standard press-tools (full steel construction advised)

This Product is REACH, RoHS, PAH and CE Compliant

Other grades, colours and finishes are available – subject to minimum batch quantities

Technical Data

Stock Roll Sizes [m x m x mm]Surface FinishWeight [kg/M2]
3.0mm x 1400mm x 10m SS 3.51
4.0mm x 1400mm x 10m SS 4.68
5.0mm x 1400mm x 10m SS 5.85
6.0mm x 1400mm x 5m SS 7.02
8.0mm x 1400mm x 5m SS 9.36
10mm x 1400mm x 5m SS 11.70
12mm x 1400mm x 5m SS 14.04
15mm x 1400mm x 5m SS 17.55
20mm x 1400mm x 5m SS 23.40
25mm x 1400mm x 5m SS 29.25
Specifications CompoundValues [typical]
Colour: Black
Compound:: NR
Density (S.G.): 1.17
Hardness Shore 'A' (±5): 60° ± 5°
Tensile Strength (Kg/cm2): 115
Elongation at break (%): 450
Minimum Temperature: -25°C
Maximum temperature: +70°C
Abrasion resistance (mmᶟ): 120
Compression Set (70°C for 22 hours) %:

RELATED PRODUCTS

Consent

I agree to my personal data being stored and used to receive the newsletter.

This website uses cookies. If you agree to our Privacy & Cookies Policy, please click here