Features:
- 20-year lifespan
- Minimal extra load on roof (specific gravity approx. 1.25kg /m2)
- Wide temperate range (-25°C to +130°C)
- Withstands structure movement (can stretch up to approx 300% without tearing, cracking or splitting)
- Superior waterproofing capabilities compare to conventional EPDM sheets
- Does not deteriorate due to weather, heat, sunlight or oxidation
- Resistant to most acidic & alkaline conditions with a better chemical resistance than alternatives
- Perfect for roofing, wall protection and mining/construction applications
Description:
Metroseal’s EPDM rubber roofing membrane is a high-quality solution offering remarkable elasticity, capable of stretching without tearing or cracking, ensuring long-lasting durability across a range of temperatures.
Installation is straightforward, guaranteeing cost-efficiency and durability. Not only does it prevent leaks, but it also improves insulation and resists moss and algae growth.
Designed to withstand both acidic and alkaline conditions our membrane is a reliable choice for various applications. Its lightweight design minimises the additional roof load, ensuring structural integrity. Compared to traditional materials like asphalt and PVC, it excels in waterproofing power.
It suits diverse applications, including different roofing types, homes, garages, sheds, storage facilities, green roofs, wall protection, mining, construction, and geo-membranes.
Our EPDM Rubber Roofing Membrane complies with industry standards, including ASTM D4637 and ASTM 6134, ensuring top-notch quality. With various dimensions available, you can easily find the right fit for your project.
Comparison of SM146 Zenseal with other waterproofing techniques
| Properties | SM146
EPDM Roofing |
PVC Roofing | Modified
Bitumen Roofing |
BUR Roofing
(Bituminous built-up Roofing) |
| UV resistance | E | P-F | F | G |
| Ozone resistance | E | E | F | F |
| High Temperature resistance | E | E | F | F |
| Cold Crack | E | F-G | P | P |
| Resistance to Plasticiser Migration | E | F-G | P | P |
| Dimensional | E | P-F | F | F |
| Install over existing roof | YES | YES | YES | NO |
| NA = Not Applicable, E = Excellent, G = Good, F = Fair, P = Poor | ||||
|
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
| COLOUR | VISUAL | BLACK | BLACK | |
| DENSITY | 1.10 | 1.10 | ||
| HARDNESS | ASTM D 2240 | 65 ± 10 SH A | DIN 53505 | 65 ± 10 SH A |
| TENSILE STRENGTH ( MIN ) | ASTM D 412 | 90KG/CM | DIN 53504 | 1280.7 PSI |
| ELONGATION AT BREAK ( MIN ) | ASTM D 412 | 300% | DIN 53504 | 300% |
| ABRASION RESISTANCE ( MAX ) | ASTM D5963 | 250 MM | DIN 150 4649 | 250 MM |
| POLYMER CONTENT (%) | 100 | 100 | ||
| COMPRESSION SET (70 C/24 HRS) (MAX) | ASTM D395 METHOD B | 24% | DIN 180 815 | 24% |
| TEAR RESISTANCE (ANGULAR) MIN | ASTM D624 METHOD C | 30 KG/CM | DIN 53506 | 167.97 LBS/INCH |
| RESISTANCE TO HEAT AGEING | ||||
| PROPERTIES AFTER 166 HRS @ 115C | ASTM D 573 | |||
| TENSILE STRENGTH MIN. | ASTM D 412 | 85KGS. /CM2 | DIN 53505 | 1209.55 PSI |
| ELONGATION ( % ) | ASTM D 412 | 210 | DIN 53504 | 210 |
| LINEAR DIMENSIONAL CHANGE MAX. % | ASTM D 1204 | +/-1 | ||
| BRITTLENESS TEMPERATURE C | ASTM D 746 | -45 | ||
| RESISTANCE WATER ABSORPTION, AFTER 166HRS. ° IMMERSION @ 70 C | ||||
| % CHANGE IN MASS | ASTM D 471 | 4.0 | DIN ISO 1817 | 4.0 |
| WATER VAPOR PERMEABILITY MAX. PER- MILLS | ASTM E 96 | 3.5 | ||
| TEMPERATURE RESISTANCE | -30 TO +120°C | |||
