| PRODUCT DIMENSIONS | |||
| Code | Thickness (mm) | Width (meter) | Length (meter) |
| Duro-Tranz Marbles | 2 mm to 4.5 mm | 1/1.2/1.4/1.5/1.8/2 | 10 to 30 |
| Duro-Tranz Speckles | 2 mm to 4.5 mm | 1/1.2/1.4/1.5/1.8/2 | 10 to 30 |
| Duro-Tranz Solids | 2 mm to 4.5 mm | 1/1.2/1.4/1.5/1.8/2 | 10 to 30 |
| Duro-Tranz Ribbed Marbles | 4.30 mm to 6 mm | 1/1.2/1.4/1.5 | 10 to 30 |
| Duro-Tranz Ribbed Speckles | 4.30 mm to 6 mm | 1/1.2/1.4/1.5 | 10 to 30 |
| Duro-Tranz Ribbed Solids | 4.30 mm to 6 mm | 1/1.2/1.4/1.5 | 10 to 30 |
Warrington Fire Test for Determination of the Burning Behaviour of Floorings.
Part 1 Determination of the Burning Behaviour Using a Radiant Heat Source.
BS EN ISO 9239-1 2010
Objective: To Determine the performance of the following product when tested in accordance with BS EN ISO 9293-1: 2010.
| GENERIC DESCRIPTION | PRODUCT REFERENCE | THICKNESS | WEIGHT PER UNIT
AREA OR DENSITY |
| Rubberised floor covering
For use in railway coaches & metro coaches adhered to a birch plywood substrate |
“ICF/MD/SPEC-354”
(Flooring Only) |
14.89mm* | 9.80kg/m²* |
| Individual Components used to manufacture composite | |||
| Rubber Flooring | “ICF/MD/SPEC-354” | 2mm | 2.5-3.4kg/m² |
| Adhesive | “Adhesive Fevicol SR 998 IS
& Fevicol Hardner C” |
Unwilling to provide | Unwilling to provide |
| Plywood | “Birch Plywood (WBP grade)” | 12mm | Unable to provide |
| *determined by Warrington Fire | |||
Test Results:
Orientation of test specimens: No Direction
Average critical radiant flux = 8.05W/M²
Average smoke development = 28.92% Min
Warrington Fire Test for Determination of the Burning Behaviour of Floorings.
Part 2 Determination of Optical Density by a Chamber Method and “T11:02” ( Gas Analysis in the Smoke Box ISO, Using FTIR Technique).
EN 45545-2: 2013 + A1: 2015
Objective: To Assess the results of tests performed in accordance with methods T04, T10.03 and T11.02 as defined in EN45545-2: 2013 + A1:2015 at and irradiance level of 25W/m² with a pilot flame, on specimens of a product and to provide and opinion of compliance with the requirements, as defined in EN 45545-2: 2013 + A1: 2015.
| GENERIC DESCRIPTION | PRODUCT REFERENCE | THICKNESS | WEIGHT PER UNIT
AREA OR DENSITY |
| Rubberised floor covering
For use in railway coaches & metro coaches adhered to a birch plywood substrate |
“ICF/MD/SPEC-354”
(Flooring Only) |
14.89mm* | 9.80kg/m²* |
| Individual Components used to manufacture composite | |||
| Rubber Flooring | “ICF/MD/SPEC-354” | 2mm | 2.5-3.4kg/m² |
| Adhesive | “Adhesive Fevicol SR 998 IS
& Fevicol Hardner C” |
Unwilling to provide | Unwilling to provide |
| Plywood | “Birch Plywood (WBP grade)” | 12mm | Unable to provide |
| *determined by Warrington Fire | |||
Opinion: We consider the results of the tests confirmed in reports referenced 413221 and 413222 to the test methods detailed above demonstrate that the product as tested, complies with requirements, R10 ( detailed in table 5 of EN 45545-2: 2013 + A1: 2005) for a HL1, HL2 and HL3 hazard level classification.
Warrington Fire Test for Determination of the Burning Behaviour of Floorings
Part 2 Determination of Optical Density by a Chamber Method and “T11:02” ( Gas Analysis in the Smoke Box ISO, Using FTIR Technique).
EN 45545-2: 2013 + A1: 2015
Test Methods T10.03 & T11.02
Objective: To determine the toxic fume and optical density produced from the following product when tested in accordance with methods T10.03 and T11.02 as defined in BS EN 45545-2:2013 + A1: 2015 at an irradiance level of 25kW/M² with a plot flame.
| GENERIC DESCRIPTION | PRODUCT REFERENCE | THICKNESS | WEIGHT PER UNIT
AREA OR DENSITY |
| Rubberised floor covering
For use in railway coaches & metro coaches adhered to a birch plywood substrate |
“ICF/MD/SPEC-354”
(Flooring Only) |
14.89mm* | 9.80kg/m²* |
| Individual Components used to manufacture composite | |||
| Rubber Flooring | “ICF/MD/SPEC-354” | 2mm | 2.5-3.4kg/m² |
| Adhesive | “Adhesive Fevicol SR 998 IS
& Fevicol Hardner C” |
Unwilling to provide | Unwilling to provide |
| Plywood | “Birch Plywood (WBP grade)” | 12mm | Unable to provide |
| *determined by Warrington Fire | |||
Summary of Test Results:
The average Ds(max) value determined within 10 minutes was 137.
The average CIT value at four minutes was 0.10.
The average CIT value at eight minutes was 0.23.
