|
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.05 +- 0.05 | ASTM D297 | 1.05 +- 0.05 |
| HARDNESS | DIN 53505 | 38 +- 5 SH A | ASTM D2240 | 38 +- 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 2702 PSI | ASTM D412 | 190 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 500% | ASTM D412 | 500% |
| COMPRESSION SET (70ºC/24
HRS/25% SET) (MAX) |
DIN 53517 | 30% | ASTM D395
METHOD B |
30% |
| TEAR RESISTANCE (ANGULAR)
MIN |
DIN 53515 | 190 LBS/INCH | ASTM D624 | 45 KG/CM |
| ABRASION RESISTANCE ( max) | DIN 53516 | 88mm3 | ASTM D5963 | 88mm3 |
| CHANGE IN PROPERTIES AFTER | ||||
| HEAT AGEING ( 72 HRS. AT 70 °C ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 5 (MAX) | + 5 (MAX) | ||
| — TENSILE STRENGTH (%) | + 10 / – 15 | + 10 / – 15 | ||
| — ELONGATION AT BREAK (%) | + 10 / – 25 | + 10 / – 25 | ||
| VOLUME SWELL : AT 70ºC FOR 72
HRS/IN |
ASTM D 471 | |||
| IRM OIL NO.1 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IRM OIL NO.2 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IRM OIL NO.3 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | FAIR | ASTM D1149 | FAIR | |
| — DILUTE ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — CONCENTRATED ACIDS AND
BASES |
NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — SOLVENTS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| TEMPERATURE RANGE | -40° TO + 80°C | -40° TO + 80°C | ||
| COLOUR | RED – RAL 3027 | |||
X
- No products in the list
- Home
- About Us
- ProductsOther Products
- Boot Seal Profiles
- Cable Protection Profiles
- Clamp Profiles
- Container Door Seal Profiles
- Co-Extruded Side Seal Profiles
- Curtain Wall Profiles
- D Fender Profiles
- Dilatation Seal Profiles
- Door Seal Profiles
- EPDM Sponge Profiles
- Filler Profiles
- Flock-Coated
- Glass Run Channel Profiles
- Glazing Profiles
- Fixed Rubber & Pressure Plate Profiles
- Bespoke Manufacturing
- Research & Testing
- Sectors
- Quote Request
- Contact Us
