Home / Rubber Matting / General Purpose Rubber Matting / ‘Square Stud Pattern’ PVC Matting

Item Code: SM666

‘Square Stud Pattern’ PVC Matting

SM666 ‘Square Stud Pattern’ PVC Matting is an attractive and economic grade of PVC matting with a raised ‘Square Stud’ pattern design on one side and a plain, smooth reverse. Available in a choice of Black, Grey, Blue, Green or Red at 2.4mm stock thickness. Ideally suited for communal areas, walkways, tread mats, runners and general purpose industrial applications where a multi directional tread pattern is required.

  • Attractive low relief square studded pattern
  • Oil & Grease Resistant
  • Clean & Hygienic
  • Durable PVC compound
  • Slip resistant multi-directional patterned surface
  • Good floor to foot cold insulation properties
  • Economically priced
  • Cut lengths to order

This grade can be produced in varying width, length and thickness formats and in a variety of colours (RAL matched if needed) to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour

Technical Data

Stock Roll Sizes [m x m x mm] Weight [kg/M2]
10m x 1.1m x 2.4mm 3.5
Specifications Compound Values [typical]
Colour: Black, Grey, Blue, Green, Red
Compound:: PVC
Hardness [Shore A]:: 75°
Density [SG]:: 1.8
Tensile Strength: [MPA]: 3.0
Elongation [min]: : 200%
Abrasion Resistance [mm³]: 250
Minimum Temperture: -20°C
Maximum Temperture: +100°C


I agree to my personal data being stored and used to receive the newsletter.

This website uses cookies. If you agree to our Privacy & Cookies Policy, please click here