|
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.45 ± 0.05 | ASTM D297 | 1.45 ± 0.05 |
| HARDNESS | DIN 53505 | 70 ± 5 SH A | ASTM D2240 | 70 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 569 PSI | ASTM D412 | 40 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 200% | ASTM D412 | 200% |
| COMPRESSION SET (70 ºC/24 HRS/25% SET) (MAX) | DIN ISO 815-1 | 40% | ASTM D395 METHOD B | 40% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 100 LBS/INCH | ASTM D624 | 18 KG/CM |
| CHANGE IN PROPERTIES | ||||
| HEAT AGEING ( 72 HRS. AT 70 ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 5 (MAX) | + 5 (MAX) | ||
| — TENSILE STRENGTH (%) | + 10 / – 25 | + 10 / – 25 | ||
| — ELONGATION AT BREAK (%) | + 10 / – 25 | + 10 / – 25 | ||
| VOLUME SWELL : AT 70º C FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.1 | + 30% | + 30% | ||
| IRM OIL NO.2 | + 44% | + 44% | ||
| IRM OIL NO.3 | + 85% | + 85% | ||
| POLYMER CONTENT (NITRILE) | 10% | 10% | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | FAIR | ASTM D 1149 | FAIR | |
| — DILUTE ACIDS AND BASES | FAIR | FAIR | ||
| — CONCENTRATED ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — SOLVENTS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| TEMPERATURE RANGE | -30 º TO +90º C | -30 º TO +90º C | ||
| INSERTION | 1 PLY 22GSM COTTON FABRIC INSERTION | |||
X
- No products in the list
- Home
- About Us
- ProductsOther Products
- Boot Seal Profiles
- Cable Protection Profiles
- Clamp Profiles
- Container Door Seal Profiles
- Co-Extruded Side Seal Profiles
- Curtain Wall Profiles
- D Fender Profiles
- Dilatation Seal Profiles
- Door Seal Profiles
- EPDM Sponge Profiles
- Filler Profiles
- Flock-Coated
- Glass Run Channel Profiles
- Glazing Profiles
- Fixed Rubber & Pressure Plate Profiles
- Bespoke Manufacturing
- Research & Testing
- Sectors
- Quote Request
- Contact Us
