Metroseal

Fine Ribbed Grey EPDM Rubber Matting 36,000v

SKU: SM571-04
Roll Size: 10m

This product is available for bespoke manufacturing, please choose an option below:

Select Options

SM571-04 Fine Ribbed Rubber Matting to IEC61111-2009 Class 4 is a high quality electrical safety mat fully tested to 50,000 volts with regulation standard stamped on reverse of roll at 1000mm intervals.
Maximum safety working voltage of 36,000v.
It has a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse.

Class 4

  • REACH RoHS, PAH and CE Compliant
  • PAH compliant means Odour free unlike cheaper grades
  • Withstand Test: – 50kv – No Electrical Puncture
  • Puncture Proof Test: – 40 KV for 3 minutes
  • Working Voltage: – 36,000 volts
  • Thickness: 5.0mm
  • HALOGEN FREE
  • Excellent resistance to Acid/Alkali
  • Full test certificate supplied
  • Fully tested to specification
  • Health & Safety regulation material
  • Fully traceable supply
  • Regulatory branding on reverse
  • Anti-slip finish
  • Low maintenance
  • Available 0.91m, 1.0m and 1.2m wide rolls
  • THIS GRADE DOES NOT CONTAIN RECYCLED RUBBER
  • Cut lengths available to order

Compliance Logos

This Product is REACH, RoHS, PAH and CE Compliant.

Due to the very high quality of METROSEAL raw materials the need for additional thickness is not necessary. The IEC:61111 specification only states ‘maximum’ thickness with minimum thickness being determined by suppliers’ ability to pass the correct tests defined in Clause 5 of specification. The above materials do so with the ‘integral’ layflat quality of the rubber compounds use not impaired in any way.
In addition to the above our thinner grades present less of a trip hazard when laid offering additional safety to operators.
Standard finishes on this type are FINE RIBBED [corrugated] one side with an anti-creep impression on reverse.

MARKINGS

The example marking on the underside of the mat will consist of a tag denoting details as right:
The brand shall be placed at 1000mm intervals along length of rolls.
The brand shall be colour coded as per IEC:61111:2009 guidelines.
Class ‘O’ – RED, Class ‘1’ – WHITE, Class ‘2’ – YELLOW, Class ‘3’ – GREEN, Class ‘4’ – ORANGE.

CLAUSE NO.

PROPERTIES

SPECIFICATION

Specific Gravity 1.50 ± 0.05
Hardness, Shore A 75 ± 5
Tensile Strength, Kg/cm2 50 Min.
Elongation at Break, % 200 Min.
Colour Grey
Surface Finish Fine rib with fabric finish
ELECTRICAL PROPERTIES
5.5 MECHANICAL TESTS
5.5.2 Mechanical Puncture Test Min 70N
5.5.3 Slip Resistance Avg. force higher than 50N
5.6.2.2 Class Proof Test Withstand Test
5.6.2.3 Class – 4 (Thickness 5.0 mm) 40KV for 3 minutes 50KV – No electrical puncture
5.7 Ageing Test At 70 ± 2oC/168Hrs
Mechanical Puncture Test Should be minimum 80% of original value
5.8 Thermal Properties
5.8.1 Flame Retardance Flame should not propagate within a 50mm diameter from the centre
5.8.2 Low Temperature Resistance (4hr at -25 ± 3oC)
a) Visual Inspection No cracks
b) Voltage withstand No electrical puncture

Rubber Gaskets Quote Request

Cut Rubber Strips Quote Request

Cut Rubber Parts Quote Request