Home / Rubber Matting / Electrical Safety Matting / Fine Ribbed Grey EPDM Rubber Matting 17,000v to IEC61111-2009 Class 2

Item Code: SM571-02

Fine Ribbed Grey EPDM Rubber Matting 17,000v to IEC61111-2009 Class 2

SM570-02  Fine Ribbed Rubber Matting to IEC61111-2009 Class 2 is a High Quality electrical safety matting fully tested to 30,000 volts with regulation standard stamped on reverse of roll at 1000mm intervals.
Maximum safety working voltage of 17,000v.
It has a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse.

Class 2

  • Withstand Test:- 30kv – No Electrical Puncture
  • Puncture Proof Test : – 20 KV for 3 minutes
  • Working Voltage : – 17,000 volts
  • Thickness 4mm
  • Excellent resistance to Acid/Alkali
  • Full test certificate supplied
  • Fully tested to specification
  • Health & Safety regulation material
  • Fully traceable supply
  • Regulatory branding on reverse
  • Anti-slip finish
  • Low maintenance
  • Available 0.91m , 1.0m and 1.2m wide rolls
  • Cut lengths available to order.

This Product is REACH, RoHS, PAH and CE Compliant

Due to the very high quality of METROSEAL raw materials the need for additional thickness is not necessary. The IEC:61111 specification only states ‘maximum’ thickness with minimum thickness being determined by suppliers ability to pass the correct tests defined in Clause 5 of specification. The above materials do so with the ‘integral’ layflat quality of the rubber compounds use not impaired in any way.
In addition to the above our thinner grades present less of a trip hazard when laid offering additional safety to operators.
Standard finishes on this type is FINE RIBBED [corrugated] one side with an anti-creep impression on reverse.


The example marking on the underside of the mat will consist of a tag denoting details as right:
The brand shall be placed at 1000mm intervals along length of rolls.
The brand shall be colour coded as per IEC:61111:2009 guidelines
Class ‘O’ – RED , Class ‘1’ – WHITE, Class ‘2’ – YELLOW, Class ‘3’ – GREEN, Class ‘4’ – ORANGE

Clause No.



Specific Gravity

1.50 ± 0.05

Hardness, Shore A

75 ± 5

Tensile Strength, Kg/cm2

50 Min.

Elongation at Break, %

200 Min.



Surface Finish

Fine rib with fabric finish






Mechanical Puncture Test

Min 70N


Slip Resistance

Avg. force higher than 50N


Proof Test

Withstand Test

Class – 0 (Thickness 2.0 mm)

20KV for 3 minutes


30KV – No electrical puncture


Ageing Test At 70 ± 2oC/168Hrs



Mechanical Puncture Test

Should be minimum 80% of original value


Thermal Properties



Flame Retardance

Flame should not propagate within a 50mm diameter from the centre


Low Temperature Resistance (4hr at -25 ± 3oC)



a) Visual Inspection

No cracks


b) Voltage withstand

No electrical puncture


I agree to my personal data being stored and used to receive the newsletter.

This website uses cookies. If you agree to our Privacy & Cookies Policy, please click here